XYPlot

// This example demonstrates the use of vtkXYPlotActor to display three
// probe lines using three different techniques.  In this example, we
// are loading data using the vtkPLOT3DReader.  We are using the
// vtkProbeFilter to extract the underlying point data along three
// probe lines.

#include <vtkActor.h>
#include <vtkAppendPolyData.h>
#include <vtkCamera.h>
#include <vtkLineSource.h>
#include <vtkMultiBlockDataSet.h>
#include <vtkMultiBlockPLOT3DReader.h>
#include <vtkNamedColors.h>
#include <vtkNew.h>
#include <vtkPolyDataMapper.h>
#include <vtkProbeFilter.h>
#include <vtkProperty.h>
#include <vtkProperty2D.h>
#include <vtkRenderWindow.h>
#include <vtkRenderWindowInteractor.h>
#include <vtkRenderer.h>
#include <vtkStructuredGrid.h>
#include <vtkStructuredGridOutlineFilter.h>
#include <vtkTextProperty.h>
#include <vtkTransform.h>
#include <vtkTransformPolyDataFilter.h>
#include <vtkTubeFilter.h>
#include <vtkXYPlotActor.h>

int main(int argc, char* argv[])
{
  if (argc < 3)
  {
    std::cout << "Usage: " << argv[0] << " combxyz.bin combq.bin" << std::endl;
    return EXIT_FAILURE;
  }

  // Create a PLOT3D reader and load the data.
  vtkNew<vtkMultiBlockPLOT3DReader> pl3d;
  pl3d->SetXYZFileName(argv[1]);
  pl3d->SetQFileName(argv[2]);
  pl3d->SetScalarFunctionNumber(100);
  pl3d->SetVectorFunctionNumber(202);
  pl3d->Update();

  auto pl3d_output =
      dynamic_cast<vtkStructuredGrid*>(pl3d->GetOutput()->GetBlock(0));

  // Create three line sources to use for the probe lines.
  vtkNew<vtkLineSource> line;
  line->SetResolution(30);

  // Move the line into place and create the probe filter. For
  // vtkProbeFilter, the probe line is the input, and the underlying data
  // set is the source.
  vtkNew<vtkTransform> transL1;
  transL1->Translate(3.7, 0.0, 28.37);
  transL1->Scale(5, 5, 5);
  transL1->RotateY(90);

  vtkNew<vtkTransformPolyDataFilter> tf;
  tf->SetInputConnection(line->GetOutputPort());
  tf->SetTransform(transL1);

  vtkNew<vtkProbeFilter> probe;
  probe->SetInputConnection(tf->GetOutputPort());
  probe->SetSourceData(pl3d_output);

  // Move the line again and create another probe filter.
  vtkNew<vtkTransform> transL2;
  transL2->Translate(9.2, 0.0, 31.20);
  transL2->Scale(5, 5, 5);
  transL2->RotateY(90);

  vtkNew<vtkTransformPolyDataFilter> tf2;
  tf2->SetInputConnection(line->GetOutputPort());
  tf2->SetTransform(transL2);
  vtkNew<vtkProbeFilter> probe2;
  probe2->SetInputConnection(tf2->GetOutputPort());
  probe2->SetSourceData(pl3d_output);

  // Move the line again and create a third probe filter.
  vtkNew<vtkTransform> transL3;
  transL3->Translate(13.27, 0.0, 33.40);
  transL3->Scale(4.5, 4.5, 4.5);
  transL3->RotateY(90);
  vtkNew<vtkTransformPolyDataFilter> tf3;
  tf3->SetInputConnection(line->GetOutputPort());
  tf3->SetTransform(transL3);
  vtkNew<vtkProbeFilter> probe3;
  probe3->SetInputConnection(tf3->GetOutputPort());
  probe3->SetSourceData(pl3d_output);

  // Create a vtkAppendPolyData to merge the output of the three probe
  // filters into one data set.
  vtkNew<vtkAppendPolyData> appendF;
  appendF->AddInputConnection(probe->GetOutputPort());
  appendF->AddInputConnection(probe2->GetOutputPort());
  appendF->AddInputConnection(probe3->GetOutputPort());

  // Create a tube filter to represent the lines as tubes.  Set up the
  // associated mapper and actor.
  vtkNew<vtkTubeFilter> tuber;
  tuber->SetInputConnection(appendF->GetOutputPort());
  tuber->SetRadius(0.1);
  vtkNew<vtkPolyDataMapper> lineMapper;
  lineMapper->SetInputConnection(tuber->GetOutputPort());
  vtkNew<vtkActor> lineActor;
  lineActor->SetMapper(lineMapper);

  // Create an xy-plot using the output of the 3 probe filters as input.
  // The x-values we are plotting are arc length.
  vtkNew<vtkNamedColors> colors;

  vtkNew<vtkXYPlotActor> xyplot;
  xyplot->AddDataSetInputConnection(probe->GetOutputPort());
  xyplot->AddDataSetInputConnection(probe2->GetOutputPort());
  xyplot->AddDataSetInputConnection(probe3->GetOutputPort());
  xyplot->GetPositionCoordinate()->SetValue(0.0, 0.67, 0);
  xyplot->GetPosition2Coordinate()->SetValue(1.0, 0.33,
                                             0); // relative to Position;
  xyplot->SetXValuesToArcLength();
  xyplot->SetNumberOfXLabels(6);
  xyplot->SetTitle("Pressure vs. Arc Length (Zoomed View)");
  xyplot->SetXTitle("");
  xyplot->SetYTitle("P");
  xyplot->SetXRange(.1, .35);
  xyplot->SetYRange(.2, .4);
  xyplot->GetProperty()->SetColor(colors->GetColor3d("Black").GetData());
  xyplot->GetProperty()->SetLineWidth(2);
  // Set text prop color
  // Assign same object to all text props
  vtkTextProperty* tprop = xyplot->GetTitleTextProperty();
  tprop->SetColor(xyplot->GetProperty()->GetColor());
  xyplot->SetAxisTitleTextProperty(tprop);
  xyplot->SetAxisLabelTextProperty(tprop);

  // Create an xy-plot using the output of the 3 probe filters as input.
  // The x-values we are plotting are normalized arc length.
  vtkNew<vtkXYPlotActor> xyplot2;
  xyplot2->AddDataSetInputConnection(probe->GetOutputPort());
  xyplot2->AddDataSetInputConnection(probe2->GetOutputPort());
  xyplot2->AddDataSetInputConnection(probe3->GetOutputPort());
  xyplot2->GetPositionCoordinate()->SetValue(0.00, 0.33, 0);
  xyplot2->GetPosition2Coordinate()->SetValue(1.0, 0.33,
                                              0); // relative to Position;
  xyplot2->SetXValuesToNormalizedArcLength();
  xyplot2->SetNumberOfXLabels(6);
  xyplot2->SetTitle("Pressure vs. Normalized Arc Length");
  xyplot2->SetXTitle("");
  xyplot2->SetYTitle("P");
  xyplot2->PlotPointsOn();
  xyplot2->PlotLinesOff();
  xyplot2->GetProperty()->SetColor(colors->GetColor3d("Tomato").GetData());
  xyplot2->GetProperty()->SetPointSize(5);
  // Set text prop color
  // Assign same object to all text props
  tprop = xyplot2->GetTitleTextProperty();
  tprop->SetColor(xyplot2->GetProperty()->GetColor());
  xyplot2->SetAxisTitleTextProperty(tprop);
  xyplot2->SetAxisLabelTextProperty(tprop);

  // Create an xy-plot using the output of the 3 probe filters as input.
  // The x-values we are plotting are the underlying point data values.
  vtkNew<vtkXYPlotActor> xyplot3;
  xyplot3->AddDataSetInputConnection(probe->GetOutputPort());
  xyplot3->AddDataSetInputConnection(probe2->GetOutputPort());
  xyplot3->AddDataSetInputConnection(probe3->GetOutputPort());
  xyplot3->GetPositionCoordinate()->SetValue(0.0, 0.0, 0);
  xyplot3->GetPosition2Coordinate()->SetValue(1.0, 0.33,
                                              0); // relative to Position;
  xyplot3->SetXValuesToIndex();
  xyplot3->SetNumberOfXLabels(6);
  xyplot3->SetTitle("Pressure vs. Point Id");
  xyplot3->SetXTitle("Probe Length");
  xyplot3->SetYTitle("P");
  xyplot3->PlotPointsOn();
  xyplot3->GetProperty()->SetColor(colors->GetColor3d("Peacock").GetData());
  xyplot3->GetProperty()->SetPointSize(3);
  // Set text prop color
  // Assign same object to all text props
  tprop = xyplot3->GetTitleTextProperty();
  tprop->SetColor(xyplot3->GetProperty()->GetColor());
  xyplot3->SetAxisTitleTextProperty(tprop);
  xyplot3->SetAxisLabelTextProperty(tprop);

  // Draw an outline of the PLOT3D data set.
  vtkNew<vtkStructuredGridOutlineFilter> outline;
  outline->SetInputData(pl3d_output);
  vtkNew<vtkPolyDataMapper> outlineMapper;
  outlineMapper->SetInputConnection(outline->GetOutputPort());
  vtkNew<vtkActor> outlineActor;
  outlineActor->SetMapper(outlineMapper);
  outlineActor->GetProperty()->SetColor(colors->GetColor3d("Black").GetData());

  // Create the Renderers, RenderWindow, and RenderWindowInteractor.
  vtkNew<vtkRenderer> renderer;
  vtkNew<vtkRenderer> renderer2;
  vtkNew<vtkRenderWindow> renderWindow;
  renderWindow->AddRenderer(renderer);
  renderWindow->AddRenderer(renderer2);
  vtkNew<vtkRenderWindowInteractor> interactor;
  interactor->SetRenderWindow(renderWindow);

  // Set the background, viewport (necessary because we want to have the
  // renderers draw to different parts of the render window) of the first
  // renderer.  Add the outline and line actors to the renderer.
  renderer->SetBackground(colors->GetColor3d("blue_light").GetData());
  renderer->SetViewport(0, 0, .5, 1);
  renderer->AddActor(outlineActor);
  renderer->AddActor(lineActor);

  // Set the background and viewport of the second renderer.  Add the
  // xy-plot actors to the renderer.  Set the size of the render window.
  renderer2->SetBackground(colors->GetColor3d("silver").GetData());
  renderer2->SetViewport(0.5, 0.0, 1.0, 1.0);
  renderer2->AddActor2D(xyplot);
  renderer2->AddActor2D(xyplot2);
  renderer2->AddActor2D(xyplot3);
  renderWindow->SetSize(800, 600);

  // Set up the camera parameters.
  vtkCamera* cam1 = renderer->GetActiveCamera();
  cam1->SetClippingRange(3.95297, 100);
  cam1->SetFocalPoint(8.88908, 0.595038, 29.3342);
  cam1->SetPosition(-12.3332, 31.7479, 41.2387);
  cam1->SetViewUp(0.060772, -0.319905, 0.945498);

  interactor->Initialize();
  renderWindow->SetWindowName("XYPlot");
  renderWindow->Render();
  interactor->Start();

  return EXIT_SUCCESS;
}

cmake_minimum_required(VERSION 3.12 FATAL_ERROR)

project(XYPlot)

find_package(VTK COMPONENTS 
  CommonColor
  CommonCore
  CommonDataModel
  CommonTransforms
  FiltersCore
  FiltersGeneral
  FiltersSources
  IOParallel
  InteractionStyle
  RenderingAnnotation
  RenderingContextOpenGL2
  RenderingCore
  RenderingFreeType
  RenderingGL2PSOpenGL2
  RenderingOpenGL2
)

if (NOT VTK_FOUND)
  message(FATAL_ERROR "XYPlot: Unable to find the VTK build folder.")
endif()

# Prevent a "command line is too long" failure in Windows.
set(CMAKE_NINJA_FORCE_RESPONSE_FILE "ON" CACHE BOOL "Force Ninja to use response files.")
add_executable(XYPlot MACOSX_BUNDLE XYPlot.cxx )
  target_link_libraries(XYPlot PRIVATE ${VTK_LIBRARIES}
)
# vtk_module_autoinit is needed
vtk_module_autoinit(
  TARGETS XYPlot
  MODULES ${VTK_LIBRARIES}
)

cd XYPlot/build

cmake ..

cmake -DVTK_DIR:PATH=/home/me/vtk_build ..

make

./XYPlot